EX-2C Low VOC Colour Coat

Endura EX-2C Low VOC color coat is a VOC compliant formula.

voc

Endura EX-2C Low VOC Topcoat is a two component highly cross-linked, high performance polyurethane coating for protecting a wide range of surfaces. High gloss, color retention and outstanding resistance to chemicals, abrasion, and impacts, provide maximum protection and an impressive surface finish.

- High gloss and color retention
- Outstanding resistance to chemicals, abrasion & impact
- A library of over 40,000 colors
- Color matching service available
- Available in: High and reduced gloss, Pearl, Metallic and Candied finishes

Application information - EX-2C v.s. EX-2C Low VOC

 
EX-2C
EX-2C Low VOC
Spraying Viscosity
14 - 16* seconds
*Unreduced
12 to 13 seconds
*Unreduced
(2 - 3 seconds less than EX-2C)
Sag Resistance
2 - 3 wet mils
4 - 5 wet mils
Thinning
Thin with EX-2C thinners or Medium Topcoat Reducer.
Not generally required
Mixing
1:1
1:1
Spray Equipment and setup
Same
Same
Paint Application
It is recommended that a thinner first layer be applied at 1.0-1.5 mils.  Allow 30-45 minutes between coats.

Apply two wet coats, heavier first coat followed up by a lighter second coat with 30 minutes flash off between coats.

*The new solvent system in the EX-2C Low VOC is much faster than regular EX-2C.
*The heavier first coat allows for better flow and improved surface finish.

Product Overview
Part Numbers
Component A - varies by colour - Component B - FUB0112 (1:1)
Service Conditions
Heavy Duty Topcoat
Recommended DFT
1.5-2.5 mils DFT
Volume Solids (%)
44%
Recommended Sector
Oilfield, Aviation, Marine, Fleet, Automotive, OEM, Architectural
VOC
< 420 grams/liter (3.5 lbs/gal) for all colours in Canada*
< 383 grams/liter (3.2 lbs/gal) for all colors in the U.S*

* VOC levels are different between Canada and the US due to the VOC exemption of Propylene Carbonate by the EPA

can Additional Product Information EX-2C Low VOC Technical Data Sheet
SDS Component A
SDS Component B
Quickstart Application Guide